 |
Industry |
|
Description |
|
A variety of release agents designed specifically for the Cold Box process. These products are available in water based, solvent based, and aerosol forms with various characteristics designed to accommodate specific needs. |
|
Both water, oil, and solvent based products are available that yield good tensile strength and varying dry times depending upon the need. |
|
Water based products that are designed to protect ferrous metals. These products provide humidity cabinet and cast iron chip test protection. Concentrated and ready to use versions are available. |
|
These are economical , high performance products that offer high flash points and low VOC. These products will not affect the affect the sand clay bond and inhibit corrosion of the metal pattern. |
|
These high flash point, low VOC cleaners have been specifically formulated to be used in an immersion system. When tooling is immersed in these cleaners, unwanted resin and sand build up is removed from the tooling surface. |
|
Versions of our deck stripper, cleaner, and brightener that are available in hose end sprayers. Simply affix the sprayer to the end of a hose and apply the product. |
|
These are low volatile mudding compounds for use with all sand binder and metal types. These compounds will not dry out or crack and are easily smoothed with molder’s tools or by hands. |
|
Solvent based release agents designed for specifically for the No Bake process. These products provide excellent release on both metal and wood tooling. |
|
Available in both a 100% active formula and a low VOC emulsion, these pattern sprays provide the desired release characteristics with all equipment, including Jolt Squeeze, Hunter, DISA and Herman equipment. |
|
This is a concentrated detergent formulated for use in a steam cleaner. It is used to clean the core boxes after they have been cleaned with a metal cleaner. It removes any residual metal cleaner and contains a rust inhibitor package to prevent flash rusting. |
|
When used as a lubricant and release agent for Green Sand, Core Oil, Hot Box and Sodium Silicate sand mixes, this product reduces sticking; promotes core oil dispersion in a muller; increases sand flowability and reduces clean-up of sand handling equipment. |
|
This zero VOC water emulsion is suitable for hot box, shell and warm box core processes. This product can be used as is or diluted up to 30% with water. It provides multiple releases with minimal buildup. |
|
We supply variety of products for Investment
casting such as
pattern release and pattern wash, silicone
mold release agent |
|
Wax pattern cleaner that removes silicone oil and other release agents from wax patterns prior to application of the primary ceramic coat. Also acts as an etching material for the wax pattern as it cleans off the release agent. |
|
These metal cleaners are designed to remove unwanted resin and sand buildup from the tooling surface. Regular use of these products will significantly increase tool life and improve core quality. |
